Audio-Technica AT-LP3 Fully Automatic Belt-Drive Stereo Turntable - White
AT-LP3 Fully Automatic Belt-Drive Stereo Turntable
Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Balanced straight tone arm with hydraulically damped lift control and rest
Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
Switchable pre-amp modes for moving magnet and moving coil cartridges
½" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat
Damped base construction for reduced low-frequency feedback coloration
The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables.
The balanced straight tone arm comes with a 1/2" mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing. A hydraulically damped lift control allows the stylus to be precisely and safely lowered and raised at any point on a record.
Yet the turntable also offers fully automatic operation, so you can simply press the Start button to begin play and the Stop button to lift and return the tone arm and shut off the turntable (the stop function occurs automatically when a record has played all the way through). The AT-LP3 is constructed of anti-vibration damping materials that limits low-frequency feedback.
Resonance is further reduced by the turntable’s die-cast aluminum platter and accompanying 4 mm rubber damping mat. Equipped to play both 33-1/3 and 45 RPM records, the AT-LP3 features a built-in switchable phono preamp and an attached dual RCA output cable that enable it be connected to a home stereo, powered speakers and other components whether they have a dedicated turntable input or not. Available in black (AT-LP3BK) and white (AT-LP3WH).
Type Fully Automatic, Belt-Drive
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise Ratio > 60 dB
Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec
“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain 36dB nominal, RIAA equalised
56dB nominal, RIAA equalised
Power Supply Requirements 220 to 240 V / 50, 60 Hz